GreyHound is a commercial grade, water-based, all-polymer, spray-applied waterproofing emulsion. GreyHound is solvent free; therefore it is fully compliant with VOC regulations in all 50 states.
It provides seamless waterproofing protection for the most difficult jobs with tremendous elongation, strength, and adhesion.
Product description:
• Commercial grade
• Will not delaminate from wall
• Solvent-free
• 100% rubber polymer emulsion
Uses:
Designed for use on parged/unparged masonry and concrete substrates. Do not backfill for 24 hours.
Preparation:
All surfaces should be free from loose materials such as sand, dirt
or other impediments, and dry. Any cracks, spall, seams, or joints
should be flashed/caulked or patched. Only use when surface and
air temperature is 35°F or greater during the application and for
12 hours after. Do not apply if rain will fall within 12 hours after
application.
Application:
GreyHound can be applied in multiple layers or as one coating. A
38 mil thick dry coating (70 mil wet) is recommended. GreyHound
should be used at a coverage rate of 22-24 sq.ft./gallon. Apply
using a roller, brush, or spray device. GreyHound does not have
long-term stability to ultraviolet light, do not leave exposed to
light more than 30 days. Please note, the application rate varies
according to the porosity of the surface. Apply two coats for best
results. DO NOT APPLY GREYHOUND IF RAIN IS ANTICIPATED
WITHIN 6 – 8 HOURS AFTER APPLICATION.
