Green Jacket + is a commercial grade, water-based, all-polymer, spray-applied waterproofing emulsion. Green Jacket + is solvent free; therefore it is fully compliant with VOC regulations in all 50 states.
It provides seamless waterproofing protection for the most difficult jobs with tremendous elongation, strength, and adhesion.
Product description:
• Commercial grade
• Will not delaminate from wall
• Solvent-free
• 100% rubber polymer emulsion
Uses:
Designed for use on parged/unparged masonry and concrete substrates. Do not backfill for 24 hours.
Preparation:
All surfaces should be free from loose materials such as sand, dirt or other impediments, and dry. Any cracks, spall, seams, or joints should be flashed/caulked or patched. Only use when surface and air temperature is 35°F or greater during the application and for 12 hours after. Do not apply if rain will fall within 12 hours after application.
Application:
Green Jacket + can be applied in multiple layers or as one coating. A 38 mil thick dry coating (70 mil wet) is recommended. Green Jacket + should be used at a coverage rate of 22-24 sq.ft./gallon. Apply using a roller, brush, or spray device. Green Jacket + does not have long-term stability to ultraviolet light, do not leave exposed to light more than 30 days. Please note, the application rate varies according to the porosity of the surface. Apply two coats for best results. DO NOT APPLY Green Jacket + IF RAIN IS ANTICIPATED WITHIN 6 – 8 HOURS AFTER APPLICATION.
